- Home
- Products
- ►
- Controls and Connectivity
- ►
- DALI-2 components
- ►
- DALI-2 sensors
- ►
- MSensor G3 PIR 16DPI
MSensor G3 PIR 16DPI WH
DALI-2 multi-sensor
Product description
- Sensor developed to work with the latest DALI specification
- Monitoring of ambient light and occupancy detection
- Remote control interface allowing infrared remote control interaction
- Individual adjustment of the parameters
- Power supply via DALI line
- Mounting ring and gasket included to reach IP65 protection
- Wide range of accessories allowing extended application range
- Double terminals for through wiring
- 5 years guarantee
Housing properties
- Casing: polycarbonate, white
- Type of protection up to IP65
Note
- Tridonic MSensor G3 family sensors are developed according to DALI Standard EN 62386-101 Ed.2, also known as DALI-2. To be able to use the sensor in such installation, an application controller is necessary.
- List of approved application controller can be found on our WEB page in “Downloads” in document “Application_controllers_MSensor_G3.pdf”.
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Suitable for | Packaging, carton | Weight per pc. |
| MSensor G3 SFI 30 PIR 16DPI WH | 28002234 | Luminaire installation | 10 pc(s). | 0.105 kg |
- Approval marks:
-
-
-
-
-
-
-
-
| Technical data | |
|---|---|
| Supply via | DALI cable |
| Supply voltage (1) | 9.5 – 22.5 V |
| Current consumption (no LED) | ≤ 8 mA |
| Current consumption (with LED) | ≤ 9 mA |
| Supported operating modes | 0 or 128 (default) |
| Mounting height (2) | 8 – 18 m |
| Adjustment range position “low” | 8 – 12 m |
| Adjustment range position “high” (2) | 12 – 18 m |
| Mounting opening | 70 x 83 mm |
| Hosuing thickness of the luminaire | 0.75 – 4 mm |
| Detection angle for PIR detection angle “low” | 72° |
| Detection angle for PIR detection angle “high” | 60° |
| Detection angle for light measurement | 13° |
| Detection range for light measurement (3) | 0.5 – 2,000 lx |
| Min. temperature difference between ambient temperature and detected object | ± 4 °C |
| Ambient temperature ta | -20 ... +50 °C |
| tc point | 60 °C |
| Storage temperature ts | -25 ... +60 °C |
| Dimensions L x W x H | 99.3 x 86.3 x 46.5 mm |
| Housing material body | PC polycarbonate |
| Housing material lens | PE polyethylene |
| Housing colour body | White (similar to RAL 9016) |
| Housing colour lens | White |
| Type of installation | Luminaire installation |
| Type of protection (4) | Up to IP65 |
| Guarantee | 5 Year(s) |
- (1) Uin acc. IEC 62386-101.
- (2) For mounting height higher than 16 m it is recommended to use several sensors grouped together in one occupancy group. As the sensitivity for the detection diameter can not be guaranteed for high over 16 m.
- (3) The measured value at the sensor head corresponds to approx. 3 to 6,300 lux on the surface measured.
- (4) Depending on the installation type up to IP 65 for more details see data sheet chapter 3.1.
| Certificates / declarations of conformity | ||
| Type | Article number | Certificates |
|---|---|---|
| Certificates () | ||
REMOTECONTROL IR6 Accessories
Product description
- Optional infra-red remote control
- Switching on and off (On/Off button)
- Dimming (Up/Down button)
- Activation of automatic lighting control (Automatic button)
- Setting the threshold control point (Set button)
- IR range up to 20 m
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Dimensions L x W x H | Packaging, carton | Weight per pc. |
| REMOTECONTOL IR6 | 28000647 | 86.5 x 40.5 x 7.2 mm | 500 pc(s). | 0.019 kg |
Shading Set Accessories
-
AISLE
-
HALF
-
ENTRY
Product description
- Shading set consisting of 3 different types of lenses
- Three different covers for the MSensor G3 SFI 30 PIR 16DPI WH, basicDIM ILD G2 and basicDIM ILD give the ability to reduce the detection area in aisle applications
- These covers can be attached or removed from/to the front of the sensor at any time without the need of opening the luminaire
- To have a maximum of flexibility these covers can be attached in every direction of 0°, 90°, 180° and 270°
| Ordering data | |||
|---|---|---|---|
| Type | Article number | Packaging, carton | Weight per pc. |
| ACU SHADING AISLE 16DPI highbay | 28001658 | 500 pc(s). | 0.002 kg |
| ACU SHADING HALF 16DPI highbay | 28001660 | 500 pc(s). | 0.002 kg |
| ACU SHADING ENTRY 16DPI highbay | 28001659 | 500 pc(s). | 0.003 kg |
Mounting box 16DPI Accessories
-
ACU MOUNTING BOX 16DPI HIGHBAY
-
ACU MOUNTING BOX 16DPI HIGHBAY with sensor
Product description
- Easy adaptation of suspended lighting fixtures to a sensor solution, just by adding one additional hole
- Side entry screw connection in combination with rubber gasket gives a true IP65 protection for industrial applications
- Easy remote commissioning with IR interface while sensor is still protected
- Tightening torque = 0.6 Nm
| Ordering data | |||
|---|---|---|---|
| Type | Article number | Packaging, carton | Weight per pc. |
| ACU MOUNTING BOX 16DPI HIGHBAY | 28001568 | 64 pc(s). | 0.105 kg |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD Files |
| ACU MOUNTING BOX 16DPI HIGHBAY | 28001568 | CAD (1.2 MB) |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD Files |
| MSensor G3 SFI 30 PIR 16DPI WH | 28002234 | CAD (3.2 MB) |