Driver LCA 120W 300–1050mA 1–10 V C ADV OTD

advanced outdoor series

Product description

  • Dimmable built-in LED Driver
  • Constant current LED Driver
  • Output current adjustable between 300 – 1,050 mA
  • Output power 120 W
  • Nominal life-time up to 100,000 h
  • Dimmable via 1 ... 10 V
  • Output dimmed analogue (current amplitude)
  • Dimming range from 10 to 100 % (absolute minimum 105 mA)
  • For luminaires of protection class I and protection class II
  • Temperature protection as per EN 61347-2-13 C5e
  • Potted style
  • 5-year guarantee

Properties

  • Type of protection IP20

Functions

  • Adjustable output current (I-select resistor)
  • Overload protection
  • Short-circuit protection
  • No-load protection
  • Burst protection voltage up to 6 kV
  • Surge protection voltage up to 6 kV (L to N)
  • Surge protection voltage up to 6 kV (L/N to earth)
Autoscroll for tables
Ordering data
Type Article number Pack­ag­ing, carton Pack­ag­ing, pallet Pack­ag­ing, high volume Weight per pc.
LCA 120W 300-1050mA 1-10V C ADV OTD 87500391 10 pc(s). 260 pc(s). 1,040 pc(s). 0.766 kg
Luminaire types:
Street lanterns
Approval marks:
IP20
120
Short Circuit Proof without safety insulation
doppelte Isolierung
KC
EAC
RCM
CE
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Typ. rated current (at 230 V, 50 Hz, full load) 573 mA
λ at full load (1) > 0.9C
Max. input power 134.8 W
THD < 20 %
Output current tolerance (2) ± 7.5 %
Max. peak output current ≤ output current + 40 %
Leakage current (PE) < 0.5 mA
Starting time < 1.5 s
Turn off time < 0.5 s
Hold on time at power failure < 0.5 s
Max. output voltage (U-OUT) 140 V
Burst / surge peaks output side against PE < 2 kV
Ambient temperature ta -30 ... +55 °C
Max. casing temperature tc 85 °C
Storage temperature ts -40 ... +80 °C
Dimensions L x W x H 150 x 90 x 40 mm
Autoscroll for tables
Specific technical data
Type Output current (1) Min. forward voltage (2) Max. for­ward volt­age (2) Max. output power Input power (at 230 V, 50 Hz, full load) Input current (at 230 V, 50 Hz, full load) Efficiency (at 230 V, 50 Hz, full load) λ (at 230 V, 50 Hz, full load) tc point max. tc/ta for ≥ 100,000 h I-select 2 resistor value
LCA 120W 300-1050mA 1-10V C ADV OTD 300 mA 40 V 114.2 V 34.3 W 41.2 W 205 mA 84 % 0.87C 70 °C 65/40 °C
LCA 120W 300-1050mA 1-10V C ADV OTD 500 mA 40 V 114.2 V 57.1 W 64.5 W 297 mA 88 % 0.95 75 °C 65/40 °C 10.00 kΩ
LCA 120W 300-1050mA 1-10V C ADV OTD 700 mA 40 V 114.2 V 79.9 W 89.1 W 400 mA 89 % 0.97 75 °C 65/40 °C 7.14 kΩ
LCA 120W 300-1050mA 1-10V C ADV OTD 900 mA 40 V 114.2 V 102.8 W 113.7 W 505 mA 90 % 0.98 80 °C 65/40 °C 5.56 kΩ
LCA 120W 300-1050mA 1-10V C ADV OTD 1,050 mA 40 V 114.2 V 119.9 W 133.1 W 590 mA 90 % 0.98 85 °C 65/40 °C 0.00 kΩ
Document      Size       Date       
Download all selected files
 Download all selected files
TALEXXdriver_LCA_120W_300-1050mA_1-10V_C_ADV_OTD_en.pdf
Data sheet
1.36 MB 17/07/2018
Leaflet_Outdoor_EN_web.pdf
Leaflet – Outdoor
3.19 MB 05/02/2019
new
Certificates / declarations of conformity
Type      Article number      Certificates     
Certificates ()

I-SELECT 2 PLUG PRE / EXC Accessories

Product description

  • Ready-for-use resistor to set output current value
  • Compatible with LED Driver featuring I-select 2 interface; not compatible with I-select (generation 1)
  • Resistor is base isolated
  • Resistor power 0.25 W
  • Current tolerance ± 2 % additional to output current tolerance
  • Compatible with LED Driver series PRE and EXC

Example of calculation

  • R [kΩ] = 5 V / I_out [mA] x 1000
  • E96 resistor value used
  • Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W; base isolation necessary
  • When using a resistor value beyond the specified range, the output current will automatically be set to the minimum value (resistor value too big), respectively to the maximum value (resistor value too small)
Ordering data
Type Article number Colour Marking Current Resistor value Pack­ag­ing, bag Weight per pc.
I-SELECT 2 PLUG 300MA BL 28001108 Blue 0300 mA 300 mA 16.50 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 325MA BL 28001109 Blue 0325 mA 325 mA 15.40 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 350MA BL 28001110 Blue 0350 mA 350 mA 14.30 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 375MA BL 28001111 Blue 0375 mA 375 mA 13.30 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 400MA BL 28001112 Blue 0400 mA 400 mA 12.40 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 425MA BL 28001251 Blue 0425 mA 425 mA 11.80 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 450MA BL 28001113 Blue 0450 mA 450 mA 11.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 475MA BL 28001252 Blue 0475 mA 475 mA 10.50 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 500MA BL 28001114 Blue 0500 mA 500 mA 10.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 525MA BL 28001960 Blue 0525 mA 525 mA 9.53 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 550MA BL 28001115 Blue 0550 mA 550 mA 9.09 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 600MA BL 28001116 Blue 0600 mA 600 mA 8.25 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 650MA BL 28001117 Blue 0650 mA 650 mA 7.68 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 700MA BL 28001118 Blue 0700 mA 700 mA 7.15 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 750MA BL 28001119 Blue 0750 mA 750 mA 6.65 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 800MA BL 28001120 Blue 0800 mA 800 mA 6.19 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 850MA BL 28001121 Blue 0850 mA 850 mA 5.90 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 900MA BL 28001122 Blue 0900 mA 900 mA 5.62 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 950MA BL 28001123 Blue 0950 mA 950 mA 5.23 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1000MA BL 28001124 Blue 1000 mA 1,000 mA 4.99 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 1050MA BL 28001125 Blue 1050 mA 1,050 mA 4.75 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG MAX BL 28001099 Blue MAX MAX 0.00 kΩ 10 pc(s). 0.001 kg
Autoscroll for tables
CAD / RAY
Type Article number CAD Files
LCA 120W 300-1050mA 1-10V C ADV OTD 87500391 CAD (574.9 KB)
 
 
Visiting from the US or Canada?
Go to our dedicated site.
http://www.tridonic.us or stay on tridonic.com