- Home
- Products
- ►
- Ballasts for fluorescent lamps
- ►
- Electronic dimming
- ►
- EXCEL T8 series
PCA T8 EXCEL one4all lp xitec II, 18 – 58 W
EXCEL T8
Product description
- Processor-controlled ballast with xitec II inside
- Highest possible energy class CELMA EEI = A1 BAT (1)
- Noise-free precise control via DALI or DSI signal, switchDIM or corridorFUNCTION
- Nominal life-time up to 100,000 h (at ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h)
- OEM-specific reserved memory areas
- Extended DALI commands
- 5-year guarantee
Interfaces
- DALI
- DSI
- switchDIM (with memory function + selectable dimming rate)
- corridorFUNCTION (3 preprogrammed profiles + individually programmable)
- Integrated SMART interface for function with all SMART Sensors and SMART plugs of the xitec II range
Functions
- Intelligent Temperature Guard (overtemperature protection)
- Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown)
- Optimum filament heating in any dimmer setting
- Disconnection of filament heating from a dimming level of approx. 90 % for maximum energy efficiency (SMART-Heating concept)
- Fade rates between 100 ms and 90 s (min. – max.)
- corridorFUNCTION with ambient light control
- Automatically triggered emergency lighting value in DC mode 15 %, can be set between 1 and 100 %
- For emergency lighting systems as per EN 50172
- Automatic start after replacement of defective lamps
- Automatic shutdown if the lamp is faulty
- Dimming possible in DC mode
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number (1) | Packaging, carton | Packaging, pallet | Weight per pc. |
| For luminaires with 1 lamp | ||||
| PCA 1x58 T8 EXCEL one4all lp xitec II | 28000036 | 10 pc(s). | 760 pc(s). | 0.236 kg |
| For luminaires with 2 lamps | ||||
| PCA 2x36 T8 EXCEL one4all lp xitec II | 28000038 | 10 pc(s). | 760 pc(s). | 0.256 kg |
| PCA 2x58 T8 EXCEL one4all lp xitec II | 28000040 | 10 pc(s). | 640 pc(s). | 0.338 kg |
- Lamp types:
-
- Approval marks:
-
-
-
-
-
-
-
| Technical data | |
|---|---|
| Mains voltage range | 220 – 240 V |
| AC voltage range | 198 – 264 V |
| DC voltage range | 176 – 280 V (lamp start ≥ 198 V DC) |
| Mains frequency | 0 / 50 / 60 Hz |
| Overvoltage protection | 320 V AC, 1 h |
| Typ. power input on stand-by | < 0.2 W |
| Protective hot restart | 0.5 s for AC / 0.2 s for DC |
| Dimming range | 1 – 100 % |
| Lamp start possible from | 1 % |
| Operating frequency | ~ 40 – 130 kHz |
| Type of protection | IP20 |
| Specific technical data | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lamp wattage | Lamp type | Type | Article number (1) | Dimensions L x W x H |
Hole spacing D | Lamp power (2) | Circuit power (2) | EEI | Current at 230 V, 50 Hz (2) | λ at 230 V, 50 Hz | tc point max. | Ambient temperature ta (3) |
| For luminaires with 1 lamp | ||||||||||||
| 1 x 58 W | T26 (T8) | PCA 1x58 T8 EXCEL one4all lp xitec II | 28000036 | 360 x 30 x 21 mm | 350 mm | 50 W | 54.0 W | A1 BAT | 0.24 A | 0.98 | 85 °C | -25 ... +70 °C |
| For luminaires with 2 lamps | ||||||||||||
| 2 x 36 W | T26 (T8) | PCA 2x36 T8 EXCEL one4all lp xitec II | 28000038 | 360 x 30 x 21 mm | 350 mm | 64 W | 70.0 W | A1 BAT | 0.31 A | 0.97 | 80 °C | -25 ... +60 °C |
| 2 x 58 W | T26 (T8) | PCA 2x58 T8 EXCEL one4all lp xitec II | 28000040 | 425 x 30 x 21 mm | 415 mm | 100 W | 107.5 W | A1 BAT | 0.48 A | 0.99 | 80 °C | -25 ... +55 °C |
- (1) Art. no. 28000034, 28000036, 28000038, 28000040 available at 1st quarter 2013.
- (2) Valid at 100 % dimming level.
- (3) +10 °C to ta max: unrestricted dimming. -25 °C to +10 °C: unrestricted dimming from 100 % to 30 %. -25 °C to +10 °C, dimming below 30 %: malfunction possible but no damage to ECG. This applies to AC and DC operation.
Further information
- FAQ – Digital dimmable ballasts (http://www.tridonic.com/com/en/faq-dimmable-ballasts.asp)
- Reference projects (http://www.tridonic.com/com/en/reference-projects.asp)
Software
| Certificates / declarations of conformity | ||
| Type | Article number | Certificates |
|---|---|---|
| Certificates () | ||